Customizing Your Phone..........................................28 Finding a Lost Handset.............................................35
Switching.to.the.Handset.Speakerphone..
Adjusting the Ringer, Earpiece and
2
Rechargeable.Nickel-Metal-Hydride.Battery..
3
Welcome
Thank.you.for.purchasing.a.Uniden.Multi-Handset.phone.
Note:. Illustrations.in.this.manual.are.used.for.explanation.purposes..Some.illustrations.in.this.manual.may.differ.
from.the.actual.unit.
As.an.Energy.Star®.Partner,.Uniden.has.determined.that.this.product.or.product.models.meets.
the.Energy.Star® guidelines for energy efficiency. Energy Star®.is.a.U.S..registered.mark.
Uniden.is.a.registered.trademark.of.Uniden.America.Corporation.
Accessibility
Uniden.provides.a.customer.service.hotline.for.accessibility.questions..If.you.have.a.disability.and.need.customer.
service.assistance.or.if.you.have.any.questions.about.how.Uniden’s.products.can.accommodate.persons.with.
disabilities,.please.call.the.accessibility.voice/TTY.line:.ꢀ-800-874-93ꢀ4.
Our.customer.care.hours.as.well.as.accessibility.information.can.be.found.on.our.website,.www.uniden.com,.under.
the.“Accessibility”.link..If.your.call.is.received.outside.of.our.business.hours,.you.can.leave.us.a.message.and.we.will.
call.you.back.
4
Terminology Used in this Manual
Standby
The.handset.is.not.in.use..If.it.is.off.the.cradle,.no.line.has.been.activated..No.dial.tone.is.present..
Caller.ID.is.available.from.your.Telephone.provider.and.is.offered.to.users.on.a.subscription.basis.
With.this.service,.you.will.be.able.to.see.the.incoming.caller.information.such.as.name.and.phone.number..
CID
CID/CW or
CIDCW
Caller.ID.with.Call.Waiting.is.available.by.subscription.from.your.Telephone.provider.
With.this.service,.you.will.be.able.to.view.incoming.caller.information.while.on.a.call.with.another.user.
Base
The.main.part.of.the.phone.that.connects.to.your.phone.line.and.lets.you.make.and.receive.calls.
A.cradle.that.comes.with.an.accessory.handset.and.charges.the.handset.battery.
It.connects.to.power.but.does.not.connect.to.a.phone.line.
Charger
Accessory
Handsets
Additional.handsets.that.can.register.to.the.base,.allowing.you.to.add.handsets.without.connecting.another.
phone.line..This.base.supports.a.total.of.six.cordless.handsets;.see.page.ꢀ9.for.Compatible.Handsets.
This.term.relates.to.feature.settings.that.will.apply.to.all.registered.handsets.and.the.base.
These.features.are.available.by.selecting."GLOBAL.SETUP".in.the.handset.menu..Only.one.handset.can.
change.global.settings.at.a.time,.and.you.have.to.make.sure.the.phone.is.not.currently.being.used..If.you.
have.multiple.bases,.the.different.bases.have.each.global.settings;.select.the.base.before.changing.the.global.
Global
Settings
Talk
A.telephone.line.has.been.activated.on.the.handset.or.base,.enabling.a.dial.tone...
Manual Conventions
This.manual.uses.several.different.type.styles.to.help.you.distinguish.between.different.parts.of.the.phone:
• Bold.text.with.“[ ]”.indicates.a.key.or.button.on.the.phone
• ALL CAPITALS indicates text on the display, such as menu options, prompts, and confirmation messages
• lower case bold.text.indicates.a.status.light.on.the.phone
• ALL CAPITALS BOLD.indicates.a.connection.jack.on.the.base.or.charger
5
Product Overview
Features
• ꢀ.9GHz.DECT6.0.Expandable.System
• Expands.up.to.6.Handsets
• Caller.ID/Call.Waiting
• 7.Ringer.Options.on.Handset.(3.Tones/4.Melodies)
• Last.5.Number.Redial
• Bilingual.Menu.Displays.
(for.US.models:.English.and.Spanish,.
for.Canadian.models:.English.and.French)
• Store.30.Caller.ID.Numbers
• Advanced.Phonebook.Features:
• Store.70.Phonebook.Entries
• Alphabetical.Search
• Call.Transfer
• Conferencing
• Intercom
• Personalized.Ring.by.Party
• Transfer.Single.Listing.or.Entire.Phonebook
• Speakerphone.on.Handset
6
Parts of the Phone
The.following.illustrations.show.you.all.of.the.different.parts.of.your.phone.
Handset
ꢀ. Headset.jack.cover.
2. Belt.clip.hole
3. Speakerphone.speaker.and.ringer
4. Handset.battery.compartment
5. new message.LED
6. Handset.earpiece
5
6
1
2
7. LCD.display
8. [Clear/Int’com].key
3
7
9.
[
].key.(up)
14
ꢀ0. [ /Flash] key (talk/flash)
15
16
8
9
10
ꢀꢀ. [ ].key.(phonebook/left)
ꢀ2. [ /tone].key
*
17
18
ꢀ3. [Redial/Pause].key
ꢀ4. [Menu/Select].key
ꢀ5. [ /Mute].key.(messages/mute)
ꢀ6. [ ].key.(caller.ID/right)
ꢀ7. [ ].key.(end.call)
11
4
19
20
12
13
ꢀ8. [ ].key.(down)
21
ꢀ9. [#].key
20. [ ].key.(speaker)
2ꢀ. Handset.microphone
22. Handset.charging.contacts
22
7
Using the Interface
Reading the Display
The.handset.display.uses.icons.to.tell.you.the.status.of.your.phone..The.table.below.lists.the.icons.and.what.they.
mean.
Icon
Status
Description
Standby/Talk The.battery.icon.indicates.the.handset.battery.status:.full,.medium,.low,.and.empty.
Standby
The.ringer off.icon.indicates.that.the.ringer.is.turned.off.
:OFF
Talk
Talk
Talk
The.mute.icon.appears.while.the.handset.microphone.is.muted.
The.speaker.icon.appears.when.the.handset.speaker.phone.is.in.use.
The.privacy.icon.appears.when.the.Privacy.Mode.is.turned.on.
P
The.voice mail.icon.appears.when.you.have.messages.waiting.in.your.voice.
mailbox.
Standby
The Standby Screen
When.the.phone.is.in.standby,.the.handset.display.shows.the.following.items:
Ringer off icon (when the ringer is off)
ꢀꢁ1((
battery icon
ꢀꢀꢀ*CPFUGVꢀꢂꢃ
ꢀꢀꢀ0GYꢀ%+&ꢁꢀꢄ
Handset ID
Number of new Caller ID calls received
9
Using the Four-way Function Key
Your.handset.has.a.four-way.function.key.that.
allows.you.to.move.the.cursor.or.pointer.on.the.
display.and.access.the.most.commonly.used.
features.at.the.touch.of.a.button..By.moving.this.
key.to.the.left,.you.open.the.phonebook..Move.the.
key.to.the.right.to.access.Caller.ID.information..To.
use.this.four-way.key,.place.your.thumb.over.the.
key.on.the.handset.and.move.to.the.four.positions.
to.get.the.feel.of.how.it.moves.and.operates.
Up
View the
View the
Caller ID
phonebook
Four-way
Function Key
Down
Using the Handset Menus
To.open.the.menu,.press.[Menu/Select]..Highlight.the.option.you.want.by.pressing.the.four-way.function.key..This.
will.move.the.cursor;.the.option.currently.highlighted.has.a.triangle.beside.it..Activate.the.highlighted.option.by.
pressing.[Menu/Select]..To.go.back.to.the.previous.screen,.press.[left].on.the.four-way.function.key..To.exit.the.
menu.and.return.to.standby,.press.[ ].
If.you.do.not.press.a.key.within.thirty.seconds,.the.phone.will.time.out.and.exit.the.menu.
Note:. For.GLOBAL.SETUP.menu.options,.make.sure.the.line.is.not.in.use.and.the.handsets.are.within.range.of.the.
base.
ꢀ0
Entering Text from Your Handset
You.can.use.the.number.keypad.on.your.handset.to.enter.text.by.referring.to.the.letters.printed.on.each.number.
key. When you press the number key in a text entry field, the phone displays the first letter printed on the number
key..Press.the.number.key.twice.to.display.the.second.letter.and.three.times.to.display.the.third..Capital.letters.are.
displayed first, then lower case letters, and then the number on the key.
If two letters in a row use the same number key, enter the first letter, then use [right] on.the.four-way.function.key.to.
move.the.cursor.to.the.next.position.to.enter.the.second.letter..
For.example,.to.enter.the.word.“Movies”:.
ꢀ) Press.[6].once.to.enter.M.
2) Use.[right].on.the.four-way.function.
key.to.move.the.cursor.to.the.right.
3) Press.[6].six.times.to.enter.o.
4) Press.[8].six.times.to.enter.v.
5) Press.[4].six.times.to.enter.i.
6) Press [3] five times to enter e.
7) Press.[7].eight.times.to.enter.s.
8) Press.[Menu/Select].to.end.your.text.
entry.
If.you.make.a.mistake.while.entering.a.
name,.use.[right] or.[left] on.the.four-
way.function.key.to.move.the.cursor.to.the.
incorrect.character..Press.[Clear/Int’com].to.erase.the.wrong.character,.and.then.enter.the.correct.character..To.
delete.all.characters,.press.and.hold.[Clear/Int’com].
Note:. When.you.enter.the.text,.you.can.also.use.[#].to.move.the.cursor.to.right.and.[ /tone].to.move.the.cursor.to.
*
left.
Download from Www.Somanuals.coꢀmꢀ. All Manuals Search And Download.
Installing the Phone
Choosing the Best Location
When.choosing.a.location.for.your.new.phone,.here.are.some.important.guidelines.you.should.consider:
• The.location.should.be.close.
to.both.a.phone.jack.and.a.
continuous.power.outlet.(one.
which.is.not.connected.to.a.
switch)..
Avoid noise sources such
as a window by a street
with heavy traffic
Avoid heat sources, such
as radiators, air ducts,
and sunlight
Avoid sources of electrical
noise such as motors,
microwave ovens, and
fluorescent lighting
• For.optimum.range.and.
reception,.place.the.base.in.an.
open.area,.as.high.as.possible..
• If.your.home.has.wired.alarm.
equipment.connected.to.a.phone.
line,.be.sure.that.installing.the.
system.does.not.disable.your.
alarm.equipment..If.you.have.
questions.about.what.will.disable.
alarm.equipment,.contact.your.
telephone company or a qualified
installer.
Avoid television sets
and other electronic
equipment
Avoid excessive moisture,
extremely low
temperatures, dust,
mechanical vibration, or
shock
Avoid personal computers
Choose a central location
Avoid other cordless telephones
Note:. For.maximum.range:.
• Keep.both.the.base.and.handset.antennas.free.of.obstruction.
• When.the.handset.is.not.in.use,.place.the.handset.in.an.upright.position.
• Metal.and.reinforced.concrete.may.affect.cordless.telephone.performance.
ꢀ2
Installing the Battery
Use.only.the.Uniden.BT-ꢀ008.rechargeable.battery.pack.supplied.with.your.cordless.telephone.
Follow.the.steps.below.to.install.the.handset.battery.
ꢀ) Press in on the handset battery case cover (use the finger
indention.for.a.better.grip).and.slide.the.cover.downward.
to.remove.
2) Plug.the.battery.cable.into.the.battery.jack..Be.sure.to.
match.the.red.and.black.wires.to.the.label.near.the.jack..
The.cable.should.snap.into.place..Gently.pull.on.the.
battery.cable..If.the.battery.connector.comes.loose,.try.
connecting.again.until.the.battery.snaps.into.place.
3) Place.the.battery.case.cover.back.on.the.handset.and.
slide.it.upwards.until.it.clicks.into.place..
ꢀ3
Installing the Belt Clip
Line.up.the.holes.on.each.side.of.the.handset..To.attach.the.belt.clip,.insert.into.
the.holes.on.each.side.of.the.handset..Press.down.until.it.clicks.
To remove the belt clip,.pull.either.side.of.the.belt.clip.to.release.the.tabs.from.
the.holes.
Connecting the Base and Charging the Handset
ꢀ) Route.the.AC.adapter.cord.through.the.“LOOP”.of.base’s.back.as.shown.
2) Connect.the.AC.adapter.to.the.DC IN 9V.jack.
Route the cord.
CAUTION: To avoid risk of fire and shock, only use the
Uniden.AD-800.AC.adapter.
3) Connect.the.AC.adapter.to.a.standard.ꢀ20V.AC.wall.outlet..
DO.NOT.use.an.AC.outlet.controlled.by.a.wall.switch..
4) Place.the.handset.in.the.base.with.the.LCD.screen.facing.
forward.
5) Make.sure.that.the.charge.LED.illuminates..If.the.LED.does.
not.illuminate,.check.to.see.that.the.AC.adapter.is.plugged.
in.and.the.handset.makes.good.contact.with.the.charging.
contacts.
To AC outlet
AC adapter (supplied)
6) Charge.your.handset.at.least.ꢀ5.to.20.hours.before.plugging.
To DC IN 9V
into.the.phone.line.
ꢀ4
Connecting to the Phone Line
ꢀ) Once.the.battery.pack.is.fully.charged,.route.the.telephone.
cord.through.the.“LOOP”.of.base’s.back.as.shown,.and.
connect.the.telephone.cord.to.the.TEL LINE.jack.
Route the cord.
2) Connect.the.telephone.cord.to.a.telephone.wall.jack.
Testing the Connection
Try.making.a.call..If.your.call.does.not.connect.or.you.cannot.
get.a.dial.tone,.try.the.following.steps:
To telephone wall jack
ꢀ) Make.sure.the.AC.adapter.cord.is.securely.connected.to.
the.DC IN 9V.jack.and.a.standard.power.outlet.
Telephone cord
(supplied)
2) Check.to.make.sure.the.battery.is.fully.charged..(If.you.
don’t.see.the.“battery.full”.icon,.check.to.make.sure.the.
battery.is.properly.connected).
To TEL LINE
3) Change.the.dial.mode.
Changing the Dial Mode
Your.phone.can.communicate.with.the.telephone.network.in.two.different.ways:.tone.dialing.or.pulse.dialing..These.
days,.most.base.networks.use.a.method.called.tone.dialing,.so.your.phone.comes.programmed.for.tone.dialing..If.
your.phone.company.uses.pulse.dialing,.you.will.need.to.change.your.phone’s.dial.mode..If.you.don’t.get.a.dial.tone.
or.can’t.connect.to.the.telephone.network,.please.follow.the.steps.below.to.modify.your.phone’s.settings:
ꢀ) Press.[Menu/Select]..Select.the.GLOBAL.SETUP.menu,.and.then.the.
Dial Mode
DIAL.MODE.submenu.
Tone
2) Scroll.[ ].to.highlight.PULSE.
Pulse
3) Press.[Menu/Select]. You will hear a confirmation tone.
If.you.ever.need.to.change.the.dial.mode.back.to.tone.dialing,.follow.the.same.procedure,.but.select.TONE.in.step.2.
Note:. If.you.have.multiple.bases,.select.the.base.before.changing.the.dial.mode.(see.Selecting.the.Base.on..
ꢀ5
Wall Mounting the Base
This.phone.can.be.mounted.on.any.standard.wall.plate.
ꢀ) Snap.the.wall.mount.adapter.into.the.notches.on.the.base’s.back.
2) Plug.the.AC.adapter.into.the.DC IN 9V.jack.
3) Plug.the.AC.adapter.into.a.standard.ꢀ20V.AC.wall.outlet.
4) Plug.the.telephone.cord.into.the.TEL LINE.jack.
5) Route.the.telephone.cord.through.the.hole.of.the.wall.mount.
adapter.as.shown.
6) Plug.the.telephone.cord.into.the.telephone.wall.jack.
7) Align.the.mounting.slots.on.the.base.with.the.mounting.posts.on..
the wall. Then push in and down until the phone is firmly seated.
Notes:
Route the cord.
• DO.NOT.use.an.AC.outlet.controlled.by.a.wall.
switch.
Wall plate
• To.mount.the.phone.directly.on.the.wall,.insert.two.
#ꢀ0.screws.(minimum.length.of.ꢀ.3/8.inches,.not.
supplied).into.the.wall,.3.ꢀ5/ꢀ6.inches.apart;.leave.
the.screw.heads.ꢀ/8.inch.away.from.the.wall.to.allow.
room.for.mounting.the.phone..Be.sure.the.wall.is.
capable.of.supporting.the.weight.of.the.phone,.and.
use.the.proper.type.of.anchoring.device.for.the.
wall.material..No.need.to.route.the.telephone.cord.
through.the.hole.of.the.wall.mount.adapter.when.
mounting.directly.on.the.wall.
AC outlet
AC adapter (supplied)
ꢀ6
Basic Setup
Selecting a Language
Your.phone.supports.two.languages:.English.and.Spanish.for.US.models.
or.English.and.French.for.Canadian.models..Once.you.select.a.language,.
the.menus.on.the.handset.will.display.in.that.language..The.default.
language.is.English.
*CPFUGVꢀ.CPIWCIG
ꢀ'PINKUJ
ꢀ'URC㩌QN
for US models
ꢀ) Press.[Menu/Select]..Select.the.HANDSET.SETUP.menu,.and.then.
the.HANDSET.LANGUAGE.submenu.
2) Move.the.cursor.to.choose.a.language.
*CPFUGVꢀ.CPIWCIG
ꢀ'PINKUJ
for.US.models:.Choose.ENGLISH.or.ESPAÑOL.(Spanish).
for.Canadian.models:.Choose.ENGLISH.or.FRANÇAIS.(French).
ꢀ(TCP㩟CKU
3) Press.[Menu/Select]. You will hear a confirmation tone.
for Canadian models
Activating Personal Ring
You.can.assign.special.ringer.tones.to.anyone.in.your.phonebook..When.your.phone.gets.a.call,.it.looks.up.the.
Caller.ID.information.in.your.phonebook..If.you’ve.assigned.a.personal.ringer.to.that.number,.the.phone.uses.it.so.
you.know.who.is.calling..To.turn.the.personal.ringing.on.or.off,.follow.these.steps:
ꢀ) Press.[Menu/Select]..Select.the.HANDSET.SETUP.menu,.and.then.
ꢀ2GTUQPCNꢀ4KPI
the.PERSONAL.RING.submenu.
ꢀ1P
2) Move.the.cursor.to.select.ON.or.OFF.
ꢀ1HH
3) Press.[Menu/Select]. You will hear a confirmation tone.
ꢀ7
Activating the Key Touch Tone
Key.Touch.Tone.is.the.tone.your.keypad.makes.when.keys.are.pressed..You.can.turn.this.tone.on.or.off.
ꢀ) Press.[Menu/Select]..Select.the.HANDSET.SETUP.menu,.and.then.
the.KEY.TOUCH.TONE.submenu.
ꢀ-G[ꢀ6QWEJꢀ6QPG
ꢀ1P
2) Move.the.cursor.to.select.ON.or.OFF.
ꢀ1HH
3) Press.[Menu/Select]. You will hear a confirmation tone.
ꢀ8
Expanding Your Phone
Adding Accessory Handsets
Your.phone.supports.a.total.of.six.cordless.handsets..You.can.now.place.a.fully-featured.cordless.handset.anywhere.
AC.power.is.available.to.connect.the.handset.charger..All.the.handsets.ring.when.a.call.is.received.
Compatible Handsets
Your.phone.is.compatible.with.the.DCX200..If.you.purchased.an.accessory.handset.separately,.you.must.register.the.
handset.to.the.base.before.use..Accessory.handsets.will.not.operate.until.they.are.registered.
Charging Accessory Handsets
The.handset’s.battery.recharges.automatically.when.the.handset.is.placed.in.the.charger..
ꢀ) Use.the.supplied.AC.adapter.(AD-0005).to.connect.the.DC IN
Route the cord.
9V.jack.to.a.standard.ꢀ20V.AC.outlet.
2) Set.the.charger.on.a.desk.or.tabletop,.and.place.the.handset.in.
the.charger.with.the.LCD.screen.facing.forward.
3) Make.sure.that.the.charge.LED.illuminates..If.the.LED.does.
not.illuminate,.check.to.see.that.the.AC.adapter.is.plugged.
in.and.the.handset.makes.good.contact.with.the.charging.
contacts.
To AC outlet
To DC IN 9V
4) Charge.the.handset.battery.pack.for.at.least.ꢀ5-20.hours.
before using your new handset for the first time.
AC adapter (supplied)
Caution: Use only the Uniden AD-0005 adapter.
ꢀ9
Registering DCX200 Accessory Handsets
If.you.purchase.an.accessory.handset,.you.need.to.register.the.handset.before.use..Handset(s).supplied.in.the.box.
with.the.base.are.pre-registered.at.the.factory..When.charged,.pre-registered.handsets.display.a.handset.ID.number..
Handsets.that.have.not.been.registered.display:
*CPFUGVꢀPQV
VQꢀTGIKUVGTꢁ
..↔..
TGIKUVGTGFꢁRNCEG
JCPFUGVꢀQPꢀDCUG
5GGꢀ[QWTꢀ1YPGT U
/CPWCNꢀHQTꢀJGNRꢁ
To.register.an.accessory.handset:
ꢀ) Charge.the.handset.for.ꢀ5-20.hours.
2) Place.the.handset.in.the.main.telephone.base.cradle.to.initiate.registration..HANDSET.REGISTERING.will.
appear.in.the.LCD..
3) Wait.approximately.thirty.seconds,."REGISTRATION.COMPLETE".will.be.displayed.to.indicate.the.handset.has.
been.registered.to.the.base.and.a.handset.ID.will.be.automatically.assigned.
If.REGISTRATION.FAILED.appears.in.the.LCD,.please.try.these.steps.again.
Note:. If.an.accessory.handset.has.ever.been.registered.to.a.base,.you.must.reset.the.handset.before.you.can.
Using Multiple Bases
DCX200.handsets.and.the.handsets.supplied.with.your.phone.can.be.registered.to.a.total.of.four.different.
DECT2060.or.DECT2080.bases..Once.your.handset.is.registered.to.more.than.one.base,.you.can.set.the.handset.to.
search.automatically.the.available.base,.or.you.can.select.manually.which.base.the.handset.should.connect.to.(for.
example,.if.you.have.one.base.with.an.answering.machine,.you.can.tell.the.handset.to.connect.that.base.to.check.
messages)..
20
Registering the Handset to Another Base
To.register.a.handset.to.another.base:
ꢀ) Make.sure.the.handset.battery.is.fully.charged.
2) On.the.base,.disconnect.the.base.AC.adapter..Then.press.and.hold.[find hs].while.you.reconnect.the.adapter..
Keep.pressing.[find hs].until.the.charge.LED.starts.to.blink.
3) On.the.handset,.Press.[Menu/Select]..Select.the.REGISTER.BASE.menu..HANDSET.REGISTERING.will.
appear.in.the.display.
4) Wait.approximately.thirty.seconds..“REGISTRATION.COMPLETE”.will.be.displayed.to.indicate.the.handset.has.
been.registered.to.the.base.and.a.handset.ID.will.be.automatically.assigned.
If.REGISTRATION.FAILED.appears.in.the.LCD,.please.try.these.steps.again.
Selecting the Base
When.your.handset.is.registered.to.another.base,.it.will.automatically.connect.to.the.base..A.base.ID.(that.is.for.the.
handset.only).will.be.assigned.in.the.order.of.registration..You.can.either.select.a.base.you.want.to.use.manually,.or.
set.to.AUTO..If.you.set.to.AUTO,.when.the.handset.comes.out.of.range,.it.searches.automatically.the.available.base.
in.order.of.base.ID.
ꢀ) With.the.phone.in.standby,.press.[Menu/Select]..Select.the.HANDSET.SETUP.menu,.and.then.the.SELECT.
BASE.submenu.
2) Move.the.cursor.to.select.the.base.you.want.to.connect.to,.or.choose.AUTO.to.have.the.handset.automatically.
select.the.base.
3) Press.[Menu/Select]..SEARCHING.will.appear.in.the.display.
4) When.the.base.is.found,.the.handset.will.return.to.standby..If.the.base.is.not.found,.“SEARCHING”.continues.
to appear. You can repeat the procedure listed above to return back to the original connection or to find the
different.base.
Notes:.•.You.cannot.change.bases.during.a.call..
• To confirm which bases the handset is registered to, open the SELECT BASE submenu and use [ ].and..
[
].to.scroll.through.the.list..Press.[ ].to.close.the.list.and.return.to.standby.
2ꢀ
Setting Up the Phonebook
Your.handset.can.store.up.to.seventy.names.and.numbers.in.your.phonebook..When.all.the.phonebook.entries.are.
full,.you.will.hear.a.beep.and.MEMORY.FULL.appears..You.cannot.store.any.additional.names.and.numbers.unless.
you.delete.some.of.the.existing.ones.
You.can.also.use.the.phonebook.entries.to.store.a.group.of.numbers.(up.to.twenty.digits).that.you.may.need.to.enter.
once.your.call.connects..This.is.referred.to.as.chain.dialing..See.Chain.Dialing.from.the.Phonebook.on.page.3ꢀ.
Creating Phonebook Entries
To.store.names.and.numbers.in.your.phonebook,.please.follow.these.steps:
ꢀ) When.the.phone.is.in.standby.mode,.press.[ ].(on.the.left.side.of.the.four-
ꢀꢀꢀ'FKVꢀ0COG
way.key).
㨫
2) To.create.a.new.phonebook.entry,.press.[Menu/Select]..Select.the.
CREATE.NEW.menu..EDIT.NAME.appears.
3) Enter the name for this entry (EDIT NAME)..
Use.the.keypad.to.enter.a.name.for.this.entry;.the.name.can.contain.up.to.sixteen.characters..(See.Entering.
Text.from.Your.Handset.on.page.ꢀꢀ.for.instructions.on.entering.text.).If.you.do.not.want.to.enter.a.name.for.this.
entry,.your.phone.will.store.this.entry.as.<NO.NAME>..Press.[Menu/Select] when you are finished.
4) Enter the number for this entry (EDIT NUMBER).
ꢀꢀ'FKVꢀ0WODGT
Once.you.have.stored.a.name,.EDIT.NUMBER.appears.next..Use.the.
number.keypad.to.enter.the.phone.number;.the.phone.number.can.contain.
ꢁꢂꢂꢃꢄꢂꢄꢅꢆꢇ㨫
up.to.twenty.digits..If.you.need.the.phone.to.pause.between.digits.when.it’s.
dialing.(for.example,.to.enter.an.extension.or.an.access.code),.press.[Redial/
Pause].to.insert.a.two-second.pause..You.will.see.a.P.in.the.display..You.can.
also.use.more.than.one.pause.together.if.two.seconds.is.not.long.enough..
Each.pause.counts.as.one.digit..Press.[Menu/Select] when you are finished.
22
5) Assign a personal ring tone for this entry (PERSONAL RING).
You.can.attach.a.special.ring.tone.to.each.phonebook.entry;.the.phone.will.
use.this.ring.tone.when.this.person.calls..Use.[ ].and.[ ]..to.select.one.
of.the.seven.different.ring.tone.options.(see.Selecting.a.Ring.Tone on.page.
hear.a.sample.of.each.tone..When.you.hear..the.ring.tone.you.want.to.use,.
press.[Menu/Select]..If.you.do.not.want.to.use.a.personal.ring.tone.for.this.
phonebook.entry,.choose.NO.SELECTION;.the.phone.will.use.your.standard.
ring.tone.setting.
ꢀ2GTUQPCNꢀ4KPI
ꢀ0Qꢀ5GNGEVKQP
ꢀ(NKEMGT
6) You will hear a tone confirming that the new entry has been stored, and DONE! appears in the display.
Finding a Phonebook Entry
Press.[ ].to.open.the.phonebook..Phonebook.entries.are.stored.in.alphabetical.order..To.scroll.through.the.
phonebook.from.A.to.Z,.press.[ ]..To.scroll.trough.the.phonebook.from.Z.to.A.press.[ ].
You.can.also.use.the.letters.on.the.number.keys.to.jump.to.a.name.that.starts.with.that.letter..For.example,.to.search.
for.an.entry.beginning.with.the.letter.M,.press.[6] once. The phonebook jumps to the first entry that begins with the
letter.you.entered;.you.can.then.use.[ ].and.[ ].to.scroll.to.other.entries.
To.close.the.phonebook,.press.[ ]..During.a.call,.press.[ ].again.instead.of.[ ] to.close.the.phonebook.
Editing an Existing Phonebook Entry
ꢀ) When.the.phone.is.in.standby,.press.[ ].to.open.the.phonebook.
2) Find.the.entry.you.want.to.edit.and.press.[Menu/Select].
3) Select.EDIT..Follow.the.steps.for.Creating.Phonebook.Entries.on.page.22..If.you.do.not.wish.to.change.the.
information.at.any.step,.simply.press.[Menu/Select].to.go.to.the.next.step.
23
Storing Caller ID or Redial Numbers in the Phonebook
You.can.store.Caller.ID.records.or.redial.numbers.in.the.phonebook.so.you.can.use.them.later..Go.to.the.Caller.ID.or.
redial.list.and.select.the.number.you.want.to.store..(If.the.Caller.ID.information.did.not.include.the.number,.then.you.
will.not.be.able.to.store.it.)
ꢀ) When.the.phone.is.in.standby,.press.[ ].to.open.the.Caller.ID.list.or.[Redial/Pause].to.open.the.redial.list.
2) Use.[ ].and.[ ] .to.scroll.through.the.Caller.ID.records.or.redial.numbers..When.you.come.to.the.information.
you.want.to.store,.press.[Menu/Select]..
3) Select.STORE.INTO.PB..EDIT.NAME.appears..If.the.phone.number.is.already.stored.in.memory,.you.will.hear.a.
beep, and THIS DATA IS ALREADY SAVED! appears in the display. The number will not be stored.
Deleting Phonebook Entries
You.can.delete.a.single.phonebook.entry.at.a.time.or.all.phonebook.entries.at.once:
To.delete.a.single.phonebook.entry:
ꢀ'FKVꢀ
ꢀ) When.the.phone.is.in.standby,.press.[ ].
ꢀ%QR[
2) Find.the.entry.that.you.want.to.delete.and.press.[Menu/Select]..
ꢀ&GNGVG
3) Select.DELETE..DELETE.ENTRY?.appears.in.the.display.
4) Move.the.cursor.to.select.YES.
5) Press.[Menu/Select]. You will hear a confirmation tone, and DELETED! appears in the display.
To.delete.all.phonebook.entries:
ꢀ%TGCVGꢀ0GYꢀ
ꢀ) When.the.phone.is.in.standby,.press.[ ].
ꢀ%QR[ꢀ#NN
2) Press.[Menu/Select],.and.then.select.DELETE.ALL..DELETE.ALL?.appears.in.
ꢀ&GNGVGꢀ#NN
the.display.
3) Move.the.cursor.to.select.YES.
4) Press.[Menu/Select]. You will hear a confirmation tone, and DELETED! .
appears.in.the.display.
24
Copying Phonebook Entries to Another Handset
If.you.have.more.than.one.handset,.you.can.transfer.phonebook.entries.from.one.handset.to.another.without.having.
to.re-enter.names.and.numbers..You.can.transfer.one.phonebook.entry.at.a.time.or.all.phonebook.entries.at.once.
ꢀ) When.the.phone.is.in.standby,.press.[ ]..
2) To copy one entry, find the phonebook entry you want to copy. Press [Menu/Select],.and.then.select.COPY..
To.copy.all.entries,.press.[Menu/Select],.and.then.select.COPY.ALL.
3) Move.the.cursor.to.select.the.handset.which.you.want.to.transfer.the.entries.to.and.then.press.[Menu/Select].
.
If.you.select.COPY.ALL,.ARE.YOU.SURE?.appears.on.the.display.screen..Move.the.cursor.to.select.YES,.and.
then.press.[Menu/Select].
4) The.phonebook.entries.will.be.transferred.to.the.designated.handset..During.the.copy.process,.the.receiving.
handset.shows.RECEIVING.and.the.Handset.ID.of.the.sending.handset.
5) When the transfer is completed, DONE! appears on the handset.
.
•.If.your.phonebook.contains.seventy.entries,.you.cannot.store.any.new.phonebook.entries..You.will.hear.a.
beep,.and.NOT.ENOUGH.MEMORY.IN.RECEIVING.UNIT.appears.on.the.display..If.the.selected.handset.is.
out.of.range.or.data.transfer.is.cancelled,.UNAVAILABLE.appears.in.the.display..Phonebook.listings.will.not.
be.transferred.
25
Using the Voice Mail Service
If.you.subscribe.to.a.voice.mail.service,.you.can.use.your.phone.to.access.your.voice.mailbox..The.new message.
LED on the handset flashes and .appears.in.the.handset.display.whenever.you.have.messages.waiting.in.your.
voice.mailbox..If.you.have.programmed.your.access.number.into.your.phone,.you.can.simply.press.[ /Mute].to.
access.your.voice.mail..When.you.subscribe.to.the.service,.your.voice.mail.provider.provides.you.with.the.access.
number.and.the.required.voice.mail.signaling.tone.
Setting the Voice Mail Signaling Tone
Your telephone service provider should provide you with the specifics of your voice mail service upon your
enrollment.
If.you.are.having.trouble.with.your.message.waiting.indicator.on.your.phone.not.illuminating.when.you.have.waiting.
messages, you will need to contact your service provider and inquire as to which type of message notification signal-
-either.Frequency.Shift.Keying.(FSK).or.Stutter.Dial.Tone.(SDT)--their.service.uses.
If.your.voice.mail.service.uses.an.FSK.message.signal.to.alert.you.of.a.new.voice.mail.message,.you.must.turn.
off.the.Voice.Mail.Tone..If.your.voice.mail.service.uses.an.SDT.message.signal.to.alert.you.of.new.voice.mail.
messages,.you.can.leave.the.Voice.Mail.Tone.on.
Follow.the.instructions.below.to.set.up.your.cordless.phone.settings:
ꢀ) Press.[Menu/Select]..Select.the.GLOBAL.SETUP.menu,.and.then.the.
8QKEGꢀ/CKNꢀ6QPG
VOICE.MAIL.TONE.submenu.
ꢀ1P
2) Move.the.cursor.to.set.the.voice.message.indication.(SDT.message.signal).
ꢀ1HH
to.ON.or.OFF.
3) Press.[Menu/Select]. You hear a confirmation tone.
26
Programming One-Touch Voice Mail Access
You.can.program.your.voice.mail.access.number.to.the.Voice.Mail.key.[ /Mute].on.each.handset.so.you.can.get.
your.messages.at.the.touch.of.a.button..Your.voice.mail.service.provider.will.supply.you.with.the.access.number.
This.number.may.be.simply.a.phone.number.
To.edit.the.voice.mail.number,.follow.the.steps.below:
ꢀ) Press.[Menu/Select].
ꢀ'ꢀFꢀKVꢀ8AOCKNꢀ0Qꢁ
2) Move.the.cursor.to.select.the.HANDSET.SETUP.menu.and.press..
㨫
[Menu/Select].
3) Move.the.cursor.to.select.EDIT.VOICE.MAIL.and.press.[Menu/Select].
4) Enter.your.personal.access.number.(up.to.twenty.digits).
5) If.you.need.to.have.the.phone.wait.before.sending.the.next.digits,.press.[Redial/Pause].to.insert.a.two-second.
pause.in.the.dialing.sequence..For.a.longer.pause,.press.[Redial/Pause].multiple.times..A.P.appears.in.the.
display.each.time.you.press.[Redial/Pause].and.each.pause.counts.as.one.digit.
6) Press.[Menu/Select] when you are finished.
Resetting the Voice Mail Waiting Indicator
When.you.receive.a.new.voice.mail.message,.the.new message LED on the top of the handset flashes and
..
appears.in.the.handset.display..In.the.event.your.message.alert.tone.gets.out.of.sync.with.your.phone.company’s.
voice.messaging.system,.you.can.reset.back.to.its.original.“no.messages.waiting”.state..To.reset,.press.and.hold.
[find hs] on the base for five seconds. A beep sounds and the message alert tone is reset.
27
Customizing Your Phone
Changing the Handset Banner
Each.handset.will.display.a.banner.name.once.it.is.registered.to.the.base..The.default.banner.is.Handset.#ꢀ,.
Handset.#2,.etc..You.can.change.the.name.your.phone.displays.by.changing.the.banner.display..If.you.have.more.
than one handset, the banner name identifies your handset.
ꢀ) Press.[Menu/Select]..Select.the.HANDSET.SETUP.menu,.and.then.the.BANNER.submenu.
2) Use.the.keypad.to.enter.or.edit.the.banner.name..(See.Entering.Text.from.Your.Handset.on.page.ꢀꢀ.for.detailed.
instructions.on.entering.text.)
3) Press.[Menu/Select]. You will hear a confirmation tone.
Note:.. When.you.have.multiple.bases.and.even.if.the.handset.ID.is.changed.when.you.switch.to.a.different.base,.
the.handset.will.keep.the.banner.name.
Selecting a Ring Tone
You.may.choose.from.four.melodies.or.three.tones.for.your.
phone’s.primary.ring.tone..Each.handset.can.use.a.different.
ring.tone.or.melody..The.available.ring.tones.are.as.listed:
Fur.Elise.(ELISE)
Flicker
Clatter
Wake.Up
We.Wish.You.A.Merry
Christmas.(MERRY-XMAS)
Aura.Lee.(AURA.LEE)
Star.Spangled.Banner
(STAR.SPNGL)
Tones
Melodies
ꢀ) Press.[Menu/Select]..Select.the.HANDSET.SETUP.
menu,.and.then.the.RINGER.TONES.submenu.
ꢀꢀ4KPIGTꢀ6QPGU
ꢀ(NKEMGT
2) Move.the.cursor.to.select.a.ring.tone..As.each.ring.tone.is.highlighted,.you.will.
hear.a.sample.
ꢀ%NCVVGT
3) When.you.hear.the.tone.you.want.to.use,.press.[Menu/Select]..You.will.hear.a.
confirmation tone.
28
Activating AutoTalk
AutoTalk.allows.you.to.answer.the.phone.simply.by.picking.up.the.handset.from.the.cradle..You.do.not.have.to.press.
a.button.to.answer.the.call.
ꢀ) Press.[Menu/Select]..Select.the.HANDSET.SETUP.menu,.and.then.the.
ꢀꢀꢀꢀ#WVQ6CNM
AUTOTALK.submenu.
ꢀ1P
2) Move.the.cursor.to.select.ON.or.OFF.
ꢀ1HH
3) Press.[Menu/Select]. You will hear a confirmation tone.
Activating Any Key Answer
Any.Key.Answer.allows.you.to.answer.the.phone.by.pressing.any.key.on.the.dial.pad..
ꢀ) Press.[Menu/Select]..Select.the.HANDSET.SETUP.menu,.and.then.the.ANY.KEY.
ꢀ#P[ꢀ-G[ꢀ#PUYGT
ANSWER.submenu.
ꢀ1P
2) Move.the.cursor.to.select.ON.or.OFF.
ꢀ1HH
3) Press.[Menu/Select]. You will hear a confirmation tone.
29
Using Your Phone
From a cordless handset
From a handset speaker phone
ꢀ) Pick.up.the.handset.from.the.cradle.
2) Press.[ /Flash].
ꢀ) Pick.up.the.handset.from.the.cradle.
2) Press.[ ].
3) Listen.for.the.dial.tone.
4) Dial.the.number.
3) Listen.for.the.dial.tone.
4) Dial.the.number.
Making
a call
OR
OR
ꢀ) Pick.up.the.handset.from.the.cradle.
2) Dial.the.number.
ꢀ) Pick.up.the.handset.from.the.cradle.
2) Dial.the.number..
3) Press.[ /Flash].
3) Press.[ ].
ꢀ) Pick.up.the.handset..(If.AutoTalk.is.on,.the.
phone.will.answer.when.you.pick.up.the.
handset.from.the.cradle.)
ꢀ) Pick.up.the.handset..
Answering
a call
2) Press.[ ].
2) Press.[ /Flash]..(If.Any.Key.Answer.is.on,.
you.can.also.press.any.key.on.the.dial.pad.)
Hanging up
Press.[ ].or.return.the.handset.to.the.cradle.
Press.[ ].or.return.the.handset.to.the.cradle.
30
Making a Call from the Phonebook
ꢀ) When.the.phone.is.in.standby,.press.[ ].to.open.the.phonebook.
3) Press.[ /Flash].or.[ ].to.dial.the.number.
Note:. You.can.also.press.[ /Flash].or.[ ].before.you.open.the.phonebook..When.you.come.to.the.phone.number.
you.want.to.dial,.press.[Menu/Select].
Chain Dialing from the Phonebook
You.can.use.the.phonebook.entries.to.store.a.group.of.numbers.(up.to.twenty.digits).that.you.may.need.to.enter.
once.your.call.connects.
ꢀ) Dial.the.number.normally.
2) After.the.call.connects,.press.[ ].
3) Use.[ ].or.[ ].to.select.the.phonebook.entry.that.contains.the.digits.you.want.to.send.
4) Press.[Menu/Select].
Switching to the Handset Speakerphone During a Call
To.switch.a.normal.call.to.the.speakerphone,.press.[ ].on.the.handset..To.switch.from.a.speakerphone.call.to.a.
normal.call,.press.[ ].
3ꢀ
Using Caller ID, Call Waiting, and Redial Lists
If.you.subscribe.to.Caller.ID.service.from.your.phone.company,.your.phone.will.show.you.the.caller’s.phone.number.
and.name.(if.available).whenever.a.call.comes.in..If.you.subscribe.to.Caller.ID.on.Call.Waiting,.the.phone.will.also.
show.you.the.name.and.the.number.of.any.call.that.comes.in.while.you’re.on.the.line.
If your telephone provider supports seven-digit dialing, you can save your local area code so it does
not display in the Caller ID list. See Seven-Digit Dialing on page 38 for more information.
Using the Caller ID List
You.can.store.up.to.thirty.Caller.ID.numbers.in.each.handset..Caller.ID.records.are.
stored.from.newest.to.oldest..Once.your.Caller.ID.list.is.full,.the.oldest.record.will.be.
automatically.deleted.when.a.new.call.is.received.
To.open.the.Caller.ID.list,.press.[ ].(on.the.right.side.of.the.four-way.key)..The.
Caller ID
New : 1
Total:30
phone.will.show.the.number.of.new.Caller.ID.records.and.the.total.number.of.stored.
records..Use.[ ].and.[ ] .to.scroll.through.the.list..
ꢀꢁꢂꢁꢀꢃꢀꢁꢄꢅꢅ2/
,CPGꢃ5OKVJ
ꢁꢀꢆꢇꢈꢈꢈꢇꢀꢁꢉꢆ
Making a Call from a Caller ID Record
ꢀ) When.the.phone.is.in.standby,.press.[ ].to.open.the.Caller.ID.list.
2) Use.[ ].and.[ ] to find the Caller ID record you want to dial.
3) To.add.(or.delete).a.“ꢀ”.to.the.beginning.of.the.displayed.phone.number,.press.[ /tone]..
*
4) Press.[ /Flash].or.[ ].to.dial.the.number.
Note:. You.can.also.press.[ /Flash].or.[ ].before.you.open.the.caller.ID.list..When.you.come.to.the.phone.number.
you.want.to.dial,.press.[Menu/Select].
32
Deleting Caller ID Numbers
To.delete.only.one.Caller.ID.number,.press.[ ] when the phone is in standby, and then find the number you want to
delete..Press.[Menu/Select] and select DELETE ENTRY. When the phone asks you to confirm, select YES.
To.delete.all.the.Caller.ID.numbers,.press.[ ].when.the.phone.is.in.standby,.and.then.press.[Menu/Select]..When.
the phone asks you to confirm, select YES.
Note:.When.you.delete.a.Caller.ID.number,.you.delete.it.permanently.
Using Call Waiting
If.you.have.Call.Waiting.service.and.a.second.call.comes.in.when.you.are.on.the.phone,.a.call.waiting.tone.will.
sound..Press.[ /Flash].to.accept.the.waiting.call..There.is.a.short.pause,.and.then.you.will.hear.the.new.caller..To.
return.to.the.original.caller,.press.[ /Flash].
Note:.You.must.subscribe.to.Call.Waiting.service.for.this.feature.to.operate..Not.all.features.are.available.in.all.areas.
Redialing a Number
You can quickly redial the last five numbers dialed on each handset.
ꢀ) When.the.phone.is.in.standby,.press.the.[Redial/Pause].to.open.the.redial.list.
2) Use.[ ].and.[ ].or.[Redial/Pause].to.scroll.through.the.redial.list.
3) When you find the number you want to dial, press [ /Flash].or.[ ]..
Notes: • If the number exceeds 32 digits, only the first 32 digits are retained in redial memory.
.
.
•.If.the.redial.memory.is.empty,.EMPTY.appears.in.the.display.and.you.will.hear.a.beep.
•.You.can.also.press.[ /Flash].or.[ ].before.you.open.the.redial.list..When.you.come.to.the.phone.number.
you.want.to.dial,.press.[Menu/Select].
33
Deleting a Redial Record
If.you.want.to.delete.a.phone.number.from.the.handset’s.redial.list,.follow.the.steps.below:
ꢀ) When.the.phone.is.in.standby,.press.[Redial/Pause].
2) Use.[ ].and.[ ].to.scroll.through.the.redial.list.
3) When you find the redial number you want to delete, press [Menu/Select].and.select.DELETE.ENTRY.
4) When the phone asks you to confirm, select YES. The redial number is deleted.
Adjusting the Ringer, Earpiece and Speaker Volume
Adjusting the Ringer Volume
You.can.choose.from.four.ringer.volume.settings.(off,.low,.medium,.and.high).
on.the.handset..With.the.phone.in.standby,.use.[ ].to.make.the.ringer.volume.
louder.or.[ ].to.make.it.softer.or.turn.it.completely.off.
Adjusting the Earpiece Volume
You.can.choose.from.six.volume.levels.for.the.earpiece..To.adjust.the.earpiece.
volume.while.on.a.call,.press.[ ].(to.make.it.louder).or.[ ].(to.make.it.softer)..
Adjusting the Speaker Volume
You.can.choose.from.six.volume.levels.for.the.handset.speakerphone..To.adjust.the.speaker.volume.while.on.a.
speakerphone.call,.press.[ ].(to.make.it.louder).or.[ ].(to.make.it.softer).
34
Adjusting the Audio Tone
If you aren’t satisfied with the audio quality of your phone, you can adjust the Audio Tone of the earpiece while on
a.call..Your.phone.gives.you.three.audio.tone.options:.low,.natural.and.high;.the.default.setting,.Natural.Tone,.is.
recommended.for.hearing.aid.users..Audio.tone.adjustments.only.apply.to.the.earpiece,.not.the.speakerphone.
To.adjust.the.audio.tone:
ꢀ) While.on.a.call,.press.[Menu/Select].
2) Move.the.cursor.to.select.AUDIO.TONE,.and.then.press.[Menu/Select].
3) Move.the.cursor.to.select.desired.option.(HIGH.TONE,.NATURAL.TONE,.or.LOW.TONE),.and.then.press.
[Menu/Select]..Selected.option.appears.in.the.display.for.two.seconds,.and.then.the.display.returns.to.normal.
Finding a Lost Handset
To.locate.a.misplaced.handset,.press.[find hs].on.the.base.when.the.phone.is.in.standby..The.handsets.connected.
to.the.paging.base.will.beep.for.one.minute,.and.PAGING.appears.on.the.handset.display..To.cancel.paging,.press.
[find hs].again.or.any.key.on.the.found.handset.
Note:.. Handsets.that.are.not.currently.connected.to.this.base.will.not.be.paged.
Using Hold, Conference and Transfer
Placing a Call on Hold
ꢀ) During.a.call,.press.[Clear/Int’com].on.the.handset.to.place.the.caller.on.hold..If.you.leave.a.caller.on.hold.for.
more.than.ten.seconds,.the.display.screen.will.read,.Line.On.Hold.
2) To.return.to.the.party.on.hold,.press.[ /Flash].or.[ ].on.a.handset..The.phone.will.return.to.the.holding.party.
Notes: • You can only place a caller on hold for five minutes. Once five minutes has passed, that party’s line will be
disconnected.and.the.phone.will.return.to.standby.
.
•.While.a.call.is.on.hold,.Caller.ID.and.Call.Waiting.cannot.be.received.
35
Conferencing
If.you.have.more.than.one.handset,.up.to.three.people.can.participate.in.a.conference.call..A.three-way.conference.
call.consists.of.an.outside.line.and.two.handsets..You.can.easily.join.a.call.already.in.progress..The.handsets.must.
ꢀ) Press.[ /Flash].or.[ ].to.join.the.call.
2) To.hang.up,.return.the.handset.to.the.cradle.or.press.[ ]..The.other.party.will.still.be.connected.to.the.call.
Transferring a Call
You.can.transfer.a.call.from.one.handset.to.another..The.handsets.must.be.currently.connected.to.the.same.base.
ꢀ) During.a.call,.press.[Clear/Int’com].
2) Use.[ ].or.[ ].to.select.the.handset.you.want.to.transfer.the.call.to,.and.then.press.[Menu/Select]..Select.
ALL.to.page.all.other.handsets..The.call.will.automatically.be.placed.on.hold,.and.a.paging.tone.sounds..To.
cancel.the.transfer,.press.[ /Flash].or.[ ].
3) When.another.handset.accepts.the.transferred.call,.you.will.be.disconnected..If.you.want.to.rejoin.the.call,.press.
[ /Flash].again.or.[ ].
Answering a Transferred Call
When.a.handset.receives.a.call.transfer,.it.sounds.a.paging.tone;.handsets.also.show.the.ID.of.the.handset.that.is.
paging..To.accept.the.call.transfer:
ꢀ) To.answer.the.page.and.speak.to.the.transferring.handset,.press.[ /Flash].or.[Clear/Int’com].
2) To.accept.the.call.and.speak.to.the.caller,.press.[ /Flash].
3) When.you.accept.the.transferred.call,.the.transferring.handset.will.be.disconnected.
Only the first handset.to.answer.the.transfer.page.will.be.connected.to.the.call..If.the.transfer.page.is.not.picked.up.
within.one.minute,.the.operation.will.be.canceled.
36
Using Special Features
Privacy Mode
If.you.don’t.want.other.handsets.to.interrupt.you.while.on.a.call,.turn.on.privacy.mode..As.long.as.your.handset.
is.in.privacy.mode,.other.handsets.can’t.join.your.call.or.make.any.calls.of.their.own:.their.displays.will.show.
UNAVAILABLE.
ꢀ) While.on.a.call,.press.[Menu/Select].
2) Select.CALL.PRIVACY..PRIVACY.MODE.ON.appears.in.the.display.for.two.seconds;. .appears.and.remains.in.
the.display.until.the.feature.is.turned.off.
To.turn.privacy.mode.off,.repeat.the.procedure.listed.above..PRIVACY.MODE.OFF.appears.
Using the Intercom
You.can.use.the.intercom.to.talk.to.another.handset.without.using.the.phone.line..The.handsets.must.be.currently.
Making an Intercom Page
ꢀ) When.the.phone.is.in.standby,.press.[Clear/Int’com].
2) Use.[ ].or.[ ].to.select.the.handset.you.want.to.talk.with,.and.then.press.[Menu/Select]..Select.ALL.to.page.
all.other.handsets.
3) To.cancel.the.intercom.page,.press.[ ].
Note:. Intercom.paging.will.be.cancelled.if.any.of.the.following.things.occur:
• You.receive.an.outside.call.or.an.intercom.page.while.selecting.the.other.handset.
• You.do.not.select.a.handset.within.thirty.seconds.
• Your.handset.is.out.of.range.(OUT.OF.RANGE.appears.in.the.display).
• The.party.does.not.answer.the.page.within.one.minute.
• The.party.is.busy.
• The.party.is.out.of.range.(UNAVAILABLE.appears.in.the.display).
37
Answering an Intercom Page
When.the.intercom.page.tone.sounds,.the.display.will.show.the.ID.of.the.handset.that.is.paging.
ꢀ) Press.[ /Flash].or.[Clear/Int’com]..If.AutoTalk.is.on,.the.handset.will.automatically.answer.the.page.when.you.
pick.up.the.handset.from.the.cradle.
2) To.hang.up.an.intercom.call,.press.[ ].
Muting the Ringer (One call only)
While.the.phone.is.ringing,.press.[ ].to.mute.the.ringer.for.this.call..The.phone.will.ring.again.on.the.next.call.
Muting the Microphone
Mute.turns.off.the.microphone.so.the.caller.can’t.hear.you..This.only.works.while.you.are.on.a.call..
ꢀ) Press.[ /Mute]..MUTE.ON.and. .appear.in.the.display;. .remains.while.muting.is.on.
2) To.cancel.muting,.press.[ /Mute].again..MUTE.OFF.appears.
Seven-Digit Dialing
In.some.areas,.the.telephone.company.may.allow.you.to.place.a.local.call.by.dialing.only.seven.digits.(instead.of.
ten)..If.this.is.the.case.in.your.area,.you.can.program.your.local.area.code.in.your.phone..Programming.your.area.
code.will.allow.you.to.see.the.caller’s.seven-digit.phone.number.which.will.allow.you.to.easily.return.the.local.call.
without.modifying.the.number.before.dialing..If.you.get.a.call.from.outside.your.area.code,.you.will.see.all.ten.digits.
To.program.your.local.area.code:
ꢀ) Press.[Menu/Select]..Select.the.GLOBAL.SETUP.menu,.and.then.the.AREA.CODE.submenu.
2) Use.the.number.keypad.([0].through.[9]).to.enter.a.three-digit.area.code..If.an.area.code.has.already.been.
stored,.it.appears.in.the.display..Press.[Clear/Int’com]..to.delete.the.stored.code,.and.then.enter.a.new.one.
3) Press.[Menu/Select]. You will hear a confirmation tone.
38
Tone Dialing Switch Over
If.your.phone.is.set.to.pulse.dialing,.you.can.temporarily.switch.to.tone.dialing.after.the.call.connects..This.feature.
is.useful.when.you.need.tone.dialing.to.use.automated.menu.systems,.such.as.telephone.bank.tellers,.telephone.
prescription refills, customer support menus, etc. Make your call normally. Once your call connects, press [ /tone].
*
on.the.handset..Any.digits.you.enter.from.then.on.will.be.sent.with.tone.dialing..When.this.particular.call.ends,.the.
phone.automatically.returns.to.pulse.dialing.
See.Changing.the.Dial.Mode.on.page.ꢀ5.for.instructions.on.setting.your.phone.for.pulse.or.tone.dialing.
Line Mode Setup (Base only)
The.Line.Mode.Setup.feature.is.only.used.in.instances.where.you.have.multiple.phones.where.users.may.pick.up.an.
extension.while.someone.else.is.on.the.phone..Only.in.very.rare.instances.where.your.phone.system.is.not.detecting.
that.an.extension.phone.is.picked.up.will.you.ever.need.to.change.this.feature..There.are.three.settings.for.this.
feature:.TYPE-A,.TYPE-B,.or.OFF,.but.change.this.option.only.when.instructed.to.by.customer.service..In.most.all.
situations, this feature will never need to be used or modified from the factory default setting of TYPE-A.
2) Press.[Menu/Select]..Select.the.GLOBAL.SETUP.menu,.and.then.the.SET.LINE.MODE.submenu..
3) IF.INSTRUCTED.BY.CUSTOMER.SERVICE.PRESS.[SELECT].appears..Press.[Menu/Select].
4) Move.the.cursor.to.select.TYPE.-.A,.TYPE.-.B,.or.OFF.
5) Press.[Menu/Select]. You will hear a confirmation tone.
Installing the Optional Headset
Your.phone.may.be.used.with.an.optional.headset..To.use.this.feature,.insert.the.headset.plug.into.
the.headset.jack..Your.phone.is.ready.for.hands-free.conversations..(Headsets.may.be.purchased.
by.calling.the.Uniden.Parts.Department..See.inside.the.back.cover.page.for.contact.information.)
39
Maintenance
Specifications
Operating.Temperature
32°.F.to.ꢀ22°.F.(0°.C.to.50°.C)
Base:.AD-800
Charger:.AD-0005
AC.Adapter.Part.Number
AC.Adapter.Input.Voltage
Base:.ꢀ20V.AC,.60.Hz
Charger:.ꢀ20V.AC,.60.Hz
AC.Adapter.Output.
Voltage
Base:.9V.DC.@.350mA
Charger:.9V.DC.@.2ꢀ0mA
Battery.Part.Number
Battery.Capacity
BT-ꢀ008
2.4V.DC.@.650mAh
Notes:
• Use.only.the.supplied.AC.adapters.
• Be.sure.to.use.the.proper.adapter.for.the.base.and.any.chargers.
• Do not place the power cord where it creates a trip hazard or where it could become chafed and create a fire or
electrical.hazard.
• Do.not.place.the.base.in.direct.sunlight.or.subject.it.to.high.temperatures.
Battery Replacement and Handling
With.average.use,.your.phone’s.battery.should.last.approximately.one.year..To.order.replacement.batteries,.please.
contact.Uniden’s.Parts.Department..The.contact.information.is.listed.inside.the.back.cover.page.
Caution:
• Use.only.battery.pack.BT-ꢀ008..
• Do.not.remove.the.batteries.from.the.handset.to.charge.them..
• Never throw the battery into a fire, disassemble, or heat them.
• Do.not.remove.or.damage.the.battery.casing..
40
Cleaning the Battery Contacts
To.maintain.a.good.charge,.clean.the.charging.contacts.on.the.handset.
once.a.month..Dampen.a.cloth.with.plain.water..Gently.rub.the.damp.cloth.
over.the.charging.contacts.until.all.visible.dirt.is.removed..Dry.the.contacts.
thoroughly.before.returning.the.handset.to.the.cradle.
Caution: Do.not.use.paint.thinner,.alcohol,.or.other.chemical.products..
Doing so may discolor the surface of the telephone and damage the finish.
Low Battery Alert
When.the.battery.pack.is.very.low,.the.phone.is.programmed.to.eliminate.functions.in.
order.to.save.power..When.LOW.BATTERY.appears.in.the.display.and.the.phone.is.in.
standby,.none.of.the.keys.will.operate..If.you.are.on.a.call,.complete.your.conversation.as.
quickly.as.possible,.and.return.the.handset.to.the.cradle.
Low Battery
The.battery.pack.needs.to.be.charged.when.the.empty.battery.icon.appears.
Battery Life
With.average.use,.your.handset.battery.provides.approximately.ten.hours.of.talk.time.and.approximately.seven.
days.of.standby.time..You.can.achieve.optimum.battery.life.and.performance.by.returning.the.handset.to.the.base.
or.charger.after.each.use..When.your.handset.is.left.off.of.the.cradle,.the.battery.will.gradually.discharge.even.if.
the.handset.is.not.being.used..The.actual.talk.time.duration.will.be.reduced.in.proportion.to.the.amount.of.time.the.
handset.is.off.of.the.cradle.
Power Failures
During.a.power.failure,.you.will.not.be.able.to.make.or.receive.calls.with.the.phone..To.avoid.damage.from.an.
electrical.spike.when.the.power.comes.back.on,.we.recommend.you.unplug.your.phone.during.power.outages.
4ꢀ
Troubleshooting
Resetting the Handset
You.may.need.to.reset.your.handset.in.the.following.instances:
• You.lose.a.handset.and.purchase.a.new.one.
• You.get.the.message.Registration.Failed.when.you.try.to.register.the.handset.
• You.are.unable.to.register.any.handsets.to.the.base.
• When.you.register.new.handsets.to.the.base,.the.handset.IDs.do.not.match..(For.example,.the.handset.registers.
as.“Handset.#4”.but.you.only.have.two.handsets.)
• When.you.are.instructed.to.by.one.of.Uniden’s.call.center.representatives.
2) Press.and.hold.[ ].and.[#] for more than five seconds. Select DEREGISTER HS.
3) Select.the.handset.which.you.are.operating,.and.then.press.[Menu/Select].
4) The phone will ask you to confirm the deregistration. Select YES. The selected handset will clear its registration
information.only.from.the.base.it.is.currently.connected.to,.and.then.delete.the.link.to.the.base.from.its.own.
memory.
5) When.the.base.information.is.deleted,.the.handset.displays.HANDSET.NOT.REGISTERED-PLACE.HANDSET.
ON.BASE.TO.REGISTER..SEE.YOUR.OWNER'S.MANUAL.FOR.HELP.
If.the.handset.cannot.contact.the.base,.it.will.display.OUT.OF.RANGE..Make.sure.the.handset.is.in.range.of.the.
base.and.the.base.is.connected.to.power;.you.can.also.reset.the.handset.without.the.base.(see.page.43).
42
Resetting the Handset Without the Base
If.your.original.base.is.not.available.for.some.reason,.you.can.still.reset.the.handset.and.use.it.with.another.base.
ꢀ) Press.and.hold.[ ].and.[#] for at least five seconds.
2) Move.the.cursor.to.select.BASEUNAVAILABLE.and.then.press.[Menu/Select]..BASE.UNAVAILABLE.appears.
3) Select.the.base.which.you.want.to.de-register.from,.and.then.press.[Menu/Select].
4) Move.the.cursor.to.select.YES,.and.then.press.[Menu/Select]. You hear a confirmation tone, and the
handset.deletes.its.own.base.information.without.contacting.the.base..The.handset.displays.HANDSET.NOT.
REGISTERED-PLACE.HANDSET.ON.BASE.TO.REGISTER..SEE.YOUR.OWNER'S.MANUAL.FOR.HELP...
Traveling Out of Range
During.a.call,.if.you.move.your.handset.too.far.from.your.base,.noise.may.increase..If.you.pass.the.range.limit.of.the.
base,.the.handset.will.beep,.display.OUT.OF.RANGE,.and.then.go.to.standby..The.base.will.maintain.the.connection.
for.thirty.seconds.after.the.handset.goes.out.of.range..If.you.move.the.handset.back.within.range.of.the.base.within.
thirty.seconds,.press.[ /Flash].or.[ ].to.pick.up.the.call.again.
Note:. If.it.is.set.to.automatically.select.the.available.base,.the.handset.will.begin.searching.for.another.base.thirty.
43
Common Issues
If your phone is not performing to your expectations, please try these simple steps first. If these steps do not solve
your problem, please call our Customer Hotline (see At Uniden, we’ll take care of you! inside the back cover).
Symptom
Suggestion
• Make.sure.the.AC.adapter.is.plugged.into.the.base.or.the.charger.(if.you.have.
more.than.one.handset).and.wall.outlet.
The.charge.LED.won’t.
illuminate.when.the.handset. • Make.sure.the.AC.outlet.is.not.connected.to.a.wall.switch.
is.placed.in.the.cradle.
• Make.sure.the.handset.is.properly.seated.in.the.cradle.
• Make.sure.the.charging.contacts.on.the.handset.are.clean..
• Move.the.handset.and/or.base.away.from.metal.objects.or.appliances.
• Make.sure.that.you.are.not.too.far.from.the.base.
The.audio.sounds.weak..
• Make.sure.that.you.are.not.too.far.from.the.base.
• Make.sure.the.line.is.not.in.use..If.an.outside.call.is.already.using.a.line,.you.
cannot.use.that.line.to.make.another.outside.call.
• Make.sure.your.handset.is.registered.to.the.base.
• Check.both.ends.of.the.base.telephone.cord.
Can’t.make.or.receive.calls.
• Make.sure.the.AC.adapter.is.plugged.into.the.base.and.wall.outlet.
• Disconnect.the.AC.adapter.and.reconnect.
• Keep.the.handset.away.from.microwave.ovens,.computers,.remote.control.toys,.
wireless microphones, alarm systems, intercoms, room monitors, fluorescent
lights,.and.electrical.appliances.
Severe.noise.interference.
• Move.to.another.location.or.turn.off.the.source.of.interference.
• The.call.was.placed.through.a.switchboard.
• Call.your.telephone.provider.to.verify.your.Caller.ID.service.is.current..There.may.
be.a.problem.with.your.Caller.ID.service..
The.Caller.ID.does.not.
display..
44
Symptom
Suggestion
• Make.sure.that.you.are.not.too.far.from.the.base.
• Make.sure.that.your.handset.is.registered.to.the.base.
• Charge.the.battery.in.the.handset.for.ꢀ5.to.20.hours.
The.handset.doesn’t.ring.or.
receive.a.page.
You.cannot.register.the.
handset.at.the.base.
• Charge.the.battery.pack.in.the.handset.for.ꢀ5.to.20.hours.
The.handset.doesn’t.
communicate.with.other.
handsets..
• Make.sure.that.you.have.registered.all.handsets.to.the.same.base,.and.all.
• Make.sure.there.are.not.two.handsets.already.using.the.conference.feature.
• Make.sure.that.another.handset.is.not.in.privacy.mode.
• Make.sure.that.you.have.registered.both.handsets.to.the.same.base,.and.both.
An.extra.handset.can’t.join.
the.conversation.
flashes, but there are no new
messages.
45
Liquid Damage
Moisture.and.liquid.can.damage.your.cordless.phone.
• If.the.handset.or.base.is.exposed.to.moisture.or.liquid,.but.only.the.exterior.plastic.housing.is.affected,.wipe.off.
the.liquid,.and.use.as.normal..
• If.moisture.or.liquid.has.entered.the.plastic.housing.(i.e..liquid.can.be.heard.in.the.phone.or.liquid.has.entered.the.
handset.battery.compartment.or.vent.openings.on.the.base),.follow.the.steps.below:
Handset
Base
ꢀ) Remove.the.battery.cover.and.leave.it.off.for.
ꢀ) Disconnect.the.AC.adapter.from.the.base,.cutting.
ventilation.
off.electrical.power.
2) Disconnect.the.battery.pack..Leave.the.battery.
cover.off.and.the.battery.pack.disconnected.for.at.
least.3.days.
2) Disconnect.the.telephone.cord.from.the.base.
3) Let.dry.for.at.least.3.days..
3) Once.the.handset.is.completely.dry,.reconnect.the.
battery.pack.and.the.battery.cover.
4) Recharge.the.handset’s.battery.pack.for.ꢀ5.to.20.
hours.before.using..
IMPORTANT:.You.must.unplug.the.telephone.line.while.recharging.the.battery.packs.to.avoid.charge.interruption.
CAUTION: DO NOT use a microwave oven to speed up the drying process. This will cause permanent
damage to the handset, base and the microwave oven. After following these steps, if your
46
Warning!
Precautions!
The.cords.on.this.product.and/or.accessories.contain.lead,.a.
chemical.known.to.the.State.of.California.to.cause.birth.defects.
or.other.reproductive.harm..Wash.hands.after.handling.
Before.you.read.anything.else,.please.observe.the.following:
Warning!
Uniden.America.Corporation.DOES.NOT.represent.this.unit.
to be waterproof. To reduce the risk of fire, electrical shock,
or.damage.to.the.unit,.DO.NOT.expose.this.unit.to.rain.or.
moisture..
Important Safety Instructions
When.using.your.telephone.equipment,.basic.safety.
precautions should always be followed to reduce the risk of fire,
electric.shock.and.injury.to.persons,.including.the.following:.
ꢀ. Do.not.use.this.product.near.water,.for.example,.near.
a.bath.tub,.wash.bowl,.kitchen.sink.or.laundry.tub,.in.a.
wet.basement.or.near.a.swimming.pool..
Rechargeable Nickel-Metal-Hydride
Battery Warning
•
•
•
This.equipment.contains.a.rechargeable.Nickel-Metal-
2. Avoid.using.a.telephone.(other.than.a.cordless.type).
during.an.electrical.storm..There.may.be.a.remote.risk.
of.electric.shock.from.lightning..
Hydride.battery..
The.rechargeable.batteries.contained.in.this.equipment.
may explode if disposed of in a fire.
Nickel.is.a.chemical.known.to.state.of.California.to.cause.
cancer..
3. Do.not.use.the.telephone.to.report.a.gas.leak.in.the.
vicinity.of.the.leak..
4. Use.only.the.power.cord.and.batteries.indicated.in.
this manual. Do not dispose of batteries in a fire. They
may.explode..Check.with.local.authorities.for.possible.
battery.disposal.instructions..
•
•
Do.not.short-circuit.the.battery..
Do.not.charge.the.rechargeable.battery.used.in.this.
equipment.in.any.charger.other.than.the.one.designed.to.
charge this battery as specified in the owner's manual.
Using.another.charger.may.damage.the.battery.or.cause.
the.battery.to.explode..
5. Do.not.disassemble.any.component.of.this.product.
SAVE THESE INSTRUCTIONS
CAUTION
Risk.of.explosion.if.battery.is.replaced.by.an.incorrect.type..
Dispose.of.used.batteries.according.to.the.instructions..Do.not.
open.or.mutilate.the.battery,.and.disconnect.the.battery.before.
shipping.this.product.
Rechargeable.Batteries.Must.Be.Recycled.or.Disposed.of.
Properly.
Uniden.works.to.reduce.lead.content.in.our.PVC.coated.cords.
in.our.products.and.accessories.
47
Please.follow.instructions.for.repairing,.if.any.(e.g..battery.replacement.
section);.otherwise.do.not.substitute.or.repair.any.parts.of.the.device.
except as specified in this manual. Connection to party line service is
subject.to.state.tariffs..Contact.the.state.public.utility.commission,.public.
service.commission.or.corporation.commission.for.information..This.
equipment.is.hearing.aid.compatible.
The FCC Wants You To Know
This.equipment.complies.with.Part.68.of.the.FCC.rules.and.the.
requirements.adopted.by.the.ACTA..On.the.bottom.of.this.equipment.
is a label that contains, among other information, a product identifier
in.the.format.US:.AAAEQ##TXXXX..If.requested,.this.number.must.be.
provided.to.the.telephone.company.
An applicable Universal Service Order Codes (USOC) certification
for.the.jacks.used.in.this.equipment.is.provided.(i.e.,.RJꢀꢀC).in.the.
packaging.with.each.piece.of.approved.terminal.equipment..A.plug.
and.jack.used.to.connect.this.equipment.to.the.premises.wiring.and.
telephone.network.must.comply.with.the.applicable.FCC.Part.68.rules.
and.requirements.adopted.by.the.ACTA..A.compliant.telephone.cord.
and.modular.plug.is.provided.with.this.product..It.is.designed.to.be.
connected.to.a.compatible.modular.jack.that.is.also.compliant..See.
installation.instructions.for.details.
Should.you.experience.trouble.with.this.equipment,.please.contact.
Uniden.customer.service.at.800-297-ꢀ023..If.the.equipment.is.causing.
harm.to.the.telephone.network,.the.telephone.company.may.request.that.
you.disconnect.the.equipment.until.the.problem.is.resolved..
NOTICE:.According.to.telephone.company.reports,.AC.electrical.surges,.
typically.resulting.from.lightning.strikes,.are.very.destructive.to.telephone.
equipment.connected.to.AC.power.sources..To.minimize.damage.from.
these.types.of.surges,.a.surge.arrestor.is.recommended.
Changes or modifications to this product not expressly approved by
Uniden,.or.operation.of.this.product.in.any.way.other.than.as.detailed.by.
the.owner’s.manual,.could.void.your.authority.to.operate.this.product.
The.REN.is.used.to.determine.the.number.of.devices.that.may.be.
connected.to.a.telephone.line..Excessive.RENs.on.a.telephone.line.
may.result.in.the.devices.not.ringing.in.response.to.an.incoming.call..In.
most but not all areas, the sum of RENs should not exceed five (5.0).
To.be.certain.of.the.number.of.devices.that.may.be.connected.to.a.line,.
as.determined.by.the.total.RENs,.contact.the.telephone.provider..For.
products.approved.after.July.23,.200ꢀ,.the.REN.for.this.product.is.part.
of the product identifier that has the format US:AAAEQ##TXXXX. The
digits.represented.by.##.are.the.REN.without.a.decimal.point.(e.g.,.03.
is.a.REN.of.0.3)..For.earlier.products,.the.REN.is.separately.shown.on.
the.label.
This.device.complies.with.part.ꢀ5.of.the.FCC.rules..Operation.is.subject.
to.the.following.two.conditions:.(ꢀ).This.device.may.not.cause.harmful.
interference,.and.(2).This.device.must.accept.any.interference.received,.
including.interference.that.may.cause.undesired.operation..Privacy.of.
communications.may.not.be.ensured.when.using.this.phone.
To.insure.the.safety.of.users,.the.FCC.has.established.criteria.for.
the.amount.of.radio.frequency.energy.various.products.may.produce.
depending.on.their.intended.usage..This.product.has.been.tested.
and.found.to.comply.with.the.FCC’s.exposure.criteria..For.body.worn.
operation,.the.FCC.RF.exposure.guidelines.were.also.met.when.used.
with.the.Uniden.accessories.supplied.or.designed.for.this.product..Use.
of.other.accessories.may.not.ensure.compliance.with.FCC.RF.exposure.
guidelines.and.should.be.avoided.
If.this.equipment.causes.harm.to.the.telephone.network,.the.telephone.
company.will.notify.you.in.advance.that.temporary.discontinuance.
of.service.may.be.required..But.if.advance.notice.isn’t.practical,.the.
telephone.company.will.notify.the.customer.as.soon.as.possible..Also,.
you will be advised of your right to file a complaint with the FCC if you
believe.it.is.necessary...The.telephone.company.may.make.changes.in.
its.facilities,.equipment,.operations.or.procedures.that.could.affect.the.
operation.of.the.equipment..If.this.happens.the.telephone.company.will.
provide advance notice in order for you to make necessary modifications
to.maintain.uninterrupted.service.
The.antenna(s).used.for.the.base-unit.must.be.installed.to.provide.a.
separation.distance.of.at.least.20.cm.from.all.persons.and.must.not.
be.collocated.or.operated.in.conjunction.with.any.other.antenna.or.
transmitter.
48
Radio Interference
I.C. Notice
Radio.interference.may.occasionally.cause.buzzing.and.
humming.in.your.cordless.handset,.or.clicking.noises.in.the.
base..This.interference.is.caused.by.external.sources.such.
as TV, refrigerator, vacuum cleaner, fluorescent lighting, or
electrical.storm..Your.unit.is.NOT.DEFECTIVE..If.these.noises.
continue.and.are.too.distracting,.please.check.around.your.
home.to.see.what.appliances.may.be.causing.the.problem..
In.addition,.we.recommend.that.the.base.not.be.plugged.into.
a.circuit.that.also.powers.a.major.appliance.because.of.the.
potential.for.interference..Be.certain.that.the.antenna.on.the.
unit.is.fully.extended.when.needed..In.the.unlikely.event.that.
you.consistently.hear.other.voices.or.distracting.transmissions.
on.your.phone,.you.may.be.receiving.radio.signals.from.
another.cordless.telephone.or.other.source.of.interference..
If.you.cannot.eliminate.this.type.of.interference,.you.need.to.
change.to.a.different.channel.
Finally,.it.should.be.noted.that.some.cordless.telephones.
operate.at.frequencies.that.may.cause.interference.to.nearby.
TVs.and.VCRs..To.minimize.or.prevent.such.interference,.the.
base.of.the.cordless.telephone.should.not.be.placed.near.or.on.
top.of.a.TV.or.VCR..If.interference.is.experienced,.moving.the.
cordless.telephone.farther.away.from.the.TV.or.VCR.will.often.
reduce.or.eliminate.the.interference..
Terminal Equipment
NOTICE:.This.equipment.meets.the.applicable.Industry.
Canada Terminal Equipment Technical Specifications. This is
confirmed by the registration number. The abbreviation, IC,
before the registration number signifies that registration was
performed.based.on.a.Declaration.of.Conformity.indicating.that..
Industry Canada technical specifications were met. It does not
imply.that.Industry.Canada.approved.the.equipment.
NOTICE:.The.Ringer.Equivalence.Number.(REN).for.this.
terminal.equipment.is.marked.on.the.equipment.itself..The.REN.
assigned.to.each.terminal.equipment.provides.an.indication.
of.the.maximum.number.of.terminals.allowed.to.be.connected.
to.a.telephone.interface..The.termination.on.an.interface.may.
consist.of.any.combination.of.devices.subject.only.to.the.
requirement.that.the.sum.of.the.Ringer.Equivalence.Numbers.
of all the devices does not exceed five.
Radio Equipment
The term “IC:” before the radio certification number only signifies
that Industry Canada technical specifications were met.
Cordless Telephone Privacy
Operation.is.subject.to.the.following.two.conditions:.(ꢀ).this.
device.may.not.cause.interference,.and.(2).this.device.must.
accept.any.interference,.including.interference.that.may.cause.
undesired.operation.of.the.device..“Privacy.of.communications.
may.not.be.ensured.when.using.this.telephone.”
Cordless.telephones.are.radio.devices..Communications.
between.the.handset.and.base.of.your.cordless.telephone.
are.accomplished.by.means.of.radio.waves.which.are.
broadcast.over.the.open.airways..Because.of.the.inherent.
physical.properties.of.radio.waves,.your.communications.can.
be.received.by.radio.receiving.devices.other.than.your.own.
cordless.telephone.unit..Consequently,.any.communications.
using.your.cordless.telephone.may.not.be.private.
49
A.PARTICULAR.PURPOSE..THIS.WARRANTY.DOES.
NOT.COVER.OR.PROVIDE.FOR.THE.REIMBURSEMENT.
OR.PAYMENT.OF.INCIDENTAL.OR.CONSEQUENTIAL.
DAMAGES..
One Year Limited Warranty
Important:.Evidence.of.original.purchase.is.required.for.
warranty.service..WARRANTOR:.UNIDEN.AMERICA.
CORPORATION.(“Uniden”).ELEMENTS.OF.WARRANTY:.
Uniden.warrants,.for.one.year,.to.the.original.retail.owner,.
this.Uniden.Product.to.be.free.from.defects.in.materials.and.
craftsmanship.with.only.the.limitations.or.exclusions.set.out.
below..WARRANTY.DURATION:.This.warranty.to.the.original.
user.shall.terminate.and.be.of.no.further.effect.ꢀ2.months.
after.the.date.of.original.retail.sale..The.warranty.is.invalid.if.
the.Product.is.(A).damaged.or.not.maintained.as.reasonable.
or necessary, (B) modified, altered, or used as part of any
conversion kits, subassemblies, or any configurations not sold
by.Uniden,.(C).improperly.installed,.(D).serviced.or.repaired.by.
someone.other.than.an.authorized.Uniden.service.center.for.a.
defect.or.malfunction.covered.by.this.warranty,.(E)
Some.states.do.not.allow.this.exclusion.or.limitation.of.
incidental.or.consequential.damages.so.the.above.limitation.or.
exclusion.may.not.apply.to.you.
LEGAL REMEDIES: This warranty gives you specific legal
rights,.and.you.may.also.have.other.rights.which.vary.from.
state.to.state..This.warranty.is.void.outside.the.United.States.
of.America.and.Canada..PROCEDURE.FOR.OBTAINING.
PERFORMANCE.OF.WARRANTY:.If,.after.following.the.
instructions.in.the.owner’s.manual.you.are.certain.that.the.
Product.is.defective,.pack.the.Product.carefully.(preferably.
in.its.original.packaging)..Disconnect.the.battery.from.the.
Product.and.separately.secure.the.battery.in.its.own.separate.
packaging.within.the.shipping.carton..The.Product.should.
include.all.parts.and.accessories.originally.packaged.with.the.
Product..Include.evidence.of.original.purchase.and.a.note.
describing.the.defect.that.has.caused.you.to.return.it..The.
Product.should.be.shipped.freight.prepaid,.by.traceable.means,.
to.warrantor.at:.
used.in.any.conjunction.with.equipment.or.parts.or.as.part.of.
any.system.not.manufactured.by.Uniden,.or.(F).installed.or.
programmed.by.anyone.other.than.as.detailed.by.the.owner’s.
manual.for.this.product..STATEMENT.OF.REMEDY:.In.the.
event.that.the.product.does.not.conform.to.this.warranty.at.
any.time.while.this.warranty.is.in.effect,.warrantor.will.either,.
at.its.option,.repair.or.replace.the.defective.unit.and.return.
it.to.you.without.charge.for.parts,.service,.or.any.other.cost.
(except.shipping.and.handling).incurred.by.warrantor.or.its.
representatives.in.connection.with.the.performance.of.this.
warranty..Warrantor,.at.its.option,.may.replace.the.unit.with.
a.new.or.refurbished.unit..THE.LIMITED.WARRANTY.SET.
FORTH.ABOVE.IS.THE.SOLE.AND.ENTIRE.WARRANTY.
PERTAINING.TO.THE.PRODUCT.AND.IS.IN.LIEU.OF.
AND.EXCLUDES.ALL.OTHER.WARRANTIES.OF.ANY.
NATURE.WHATSOEVER,.WHETHER.EXPRESS,.IMPLIED.
OR.ARISING.BY.OPERATION.OF.LAW,.INCLUDING,.
BUT.NOT.LIMITED.TO.ANY.IMPLIED.WARRANTIES.OF.
MERCHANTABILITY.OR.FITNESS.FOR
Uniden America Service
4700.Amon.Carter.Blvd.
Fort.Worth,.TX.76ꢀ55
50
P
T
V
Storing.Caller.ID.or.redial.
W
R
Redial
Ringer
S
52
Memo
53
At Uniden, we’ll take care of you!
Thank you for purchasing a Uniden product. if you have any questions or problems, please do not return
this product to the place of purchase.
Having trouble?
Our customer care specialists are here to help you! Visit our web-site at
www.uniden.com.or.call.our.Customer.Service.Hotline.at..
1-800-297-1023.during.regular.business.hours.*
Need a part?
To.order.headsets,.accessory.handsets,.replacement.batteries,.or.other.
1-800-554-3988.during.regular.business.hours.*.
Help for our
customers with
special needs
If.you.need.special.assistance.due.to.a.disability.or.have.questions.on.the.
accessibility.features.of.this.product,.please.call..
1-800-874-9314 (voice.or.TTY).
*.Central.Standard.Time..Detailed.customer.service.hours.are.available.at.www.uniden.com.
May.be.covered.under.one.or.more.of.the.following.U.S..patents:
4,797,9ꢀ6
5,650,790
5,754,407
5,893,034
6,070,082
6,782,098
6,953,ꢀꢀ8
5,426,690
5,660,269
5,758,289
5,9ꢀ2,968
6,ꢀ25,277
6,788,920
7,023,ꢀ76
5,434,905
5,66ꢀ,780
5,768,345
5,9ꢀ5,227
6,253,088
6,788,953
7,030,8ꢀ9
5,49ꢀ,745
5,663,98ꢀ
5,787,356
5,929,598
6,3ꢀ4,278
6,839,550
7,ꢀ46,ꢀ60
5,493,605
5,67ꢀ,248
5,794,ꢀ52
5,930,720
6,4ꢀ8,209
6,889,ꢀ84
5,533,0ꢀ0
5,696,47ꢀ
5,80ꢀ,466
5,960,358
6,6ꢀ8,0ꢀ5
6,90ꢀ,27ꢀ
5,574,727
5,7ꢀ7,3ꢀ2
5,825,ꢀ6ꢀ
5,987,330
6,67ꢀ,3ꢀ5
6,907,094
5,58ꢀ,598
5,732,355
5,864,6ꢀ9
6,044,28ꢀ
6,7ꢀ4,630
6,9ꢀ4,940
Other.patents.pending.
54
|
Tektronix Portable Generator TR 503 User Manual
Teledyne Carbon Monoxide Alarm T360 User Manual
Teledyne Weather Radio T265 User Manual
Thermador Range RDDS30V User Manual
Toshiba Network Card G9 ETB006Z User Manual
Troy Bilt Blower TB360BV User Manual
Troy Bilt Tiller 1634A User Manual
Viking Ventilation Hood VIL1200 User Manual
VistaQuest Digital Camera VQ 5015 User Manual
VTech Baby Monitor VM310 User Manual